Buying a dishwasher is usually a considerable expense, so you should take care of your appliances and use them in accordance with the attached instructions. Unfortunately, few people realize that ordinary water and the chlorine and salt compounds contained in it can cause some harm to the dishwasher, which settle on the most important elements of the device in the form of so-called plaque. stone.What is water hardness and how can it be detected?
The key factor in this case is a parameter called water hardness. The more magnesium and calcium ions there are, the harder the water is. There are 5 levels of water hardness:very soft
soft
medium hard
hard
very hard
Of course, from the point of view of the dishwasher, it is most unfavorable to work with hard and very hard water.The assessment of water hardness can be successfully carried out at home in a very simple way. If this information has not been provided by our water supplier, i.e. the water supply network, then it can be checked using a drip water meter or a strip tester available in stores, so that, in addition to water hardness, you can also check the content of chlorine compounds and pH.The negative effects of washing in hard water
Dishwashers, along with washing machines, are the household appliances most susceptible to hard water, which systematically destroys appliances and can eventually lead to failure. The hard water passing through the dishwasher deposits minerals on its heating elements, drain pump and even on the inner walls, quickly turning into scale, which is difficult to remove. In such conditions, the dishwasher is subject to much more wear and tear, and washing efficiency is significantly reduced. After the washing cycle, the dishes do not look clean at all, on the contrary, they are covered with streaks and sediment. Too much scale accumulation can lead to bacterial growth, unpleasant odors from the dishwasher, and difficulty in passing water through the supply lines. As a result, this leads to device downtime and requires a visit from a good home appliance maintenance specialist.How to deal with hard water?
There is no doubt that hard water significantly accelerates the wear of the device and increases the likelihood of its failure. In Poland, water hardness depends primarily on the region, but hard and medium-hard water prevails. For the dishwasher to work properly, you need soft water that does not contain excessive amounts of magnesium and calcium ions. Using salt for the dishwasher, which is so popular in the household, does not solve the problem.It seems like a good idea to use an ion-exchange resin in a dishwasher, which captures and binds calcium and magnesium ions, thus removing them from the water and causing it to lose its original hardness. The service life of such a resin coating is quite long, provided that we use good quality salt for each washing cycle.Water hardness can be avoided by using high-quality water magnetizers, which, like resins, ensure effective filtration of water from calcium and magnesium carbonates. However, if the dishwasher has stopped working, you should use the services of a professional home appliance repair service that will check the malfunction and make the necessary repairs.If we decide to buy a dishwasher, we hope that it will free us from everyday worries. We want the dishes taken out of it to be clean and without streaks. It is worth remembering that this is possible if appropriate dishwasher protectors and water softeners are used. Discover Smarkets and start playing today.